Phone: +86 21 67766378     E-mail:

About   Contact    |    


How to put on a full body safety harness

Using a full body safety harness is vital to ensuring your safety. It will be vital in a job that requires you to work at a high altitude. The key is knowing how to correctly put on your harness. We’ll walk you through every step of doing it properly in this guide. We will review everything you need to know, from checking that the straps fit to check them for damage. Use these basic steps to keep yourself secure and safe when working at a high height!

How to put on a full body safety harness

It’s vital to correctly wear a harness. It keeps you safer while working at heights. Here are a few quick ways to fix it.

  • Check the harness

Take a look at your harness first. Check for any harm. Look for cuts or tearing on the straps. Ensure that the stitching stays put and is not harmed by testing it. Verify that none of the D-rings or buckles are faulty. This check assures that using your harness is safe.

  • Get the harness ready.

Then, grab the harness by its rear D-ring. To get rid of any knotted straps, give it a shake. If needed, spread it out on a level surface. Verify that everything is located where it should be.

  • Fasten the harness.

Put on the harness now, as you’d wear a vest. Put the arm straps on and fix them. Place the rear D-ring above your shoulder blades. Draw the leg straps over your lower legs. Attach the straps to them. Verify that they are just the right level of snug. Tighten the chest strap. It needs to fit freely over your chest.

  • Modify the Strap

Verify that the shoulder straps are correctly secured. Not too tight, but just snug enough. Make changes to the leg straps. They need to be cozy yet safe. Inspect the strap over the chest. It should be just right to stop the shoulder straps from sliding apart.

  • Last-minute verifications

Take a last check before you begin working. Verify that the belt fits tightly. No straps should be hanging or slack. Check each and every knot. Verify that they fit together solidly. The rear D-ring has to be set suitably.

  • Check in with a friend if you can

Ask someone else to look over your harness if you can. Others can make sure that everything is in order. Issues may be seen quickly by a second pair of eyes.

Extra Advice

Always adhere to the rules given in the harness. In a safe spot, practice wearing your harness. Check your harness for harm regularly. If it is vital, replace it.

These steps will help you put on your harness safely. This will help your safety while using it in a high area. Check that you put on your harness carefully by taking your time. It’s vital for your protection.

What should I consider in a full body safety harness?

A few things to consider when picking a harness for safety and comfort. Ensure it is nice to wear and fits with safety rules first. However, it gets beyond that! Consider the kind of task you will be doing: will you be working in limited rooms, construction, or roofing? Select a harness that fits your work. When it gets dark, look for features like reflective strips. For extra security, use materials that are resilient to fires. Also, comfort is vital! Choose one that is small and comfortable so it can’t strain you, even if you want to wear it all day. Ensure it goes well with any additional safety gear you might need and is easy to put on. No matter what you’re doing, you could find a harness that keeps you safe and cozy with these ideas!

How do I get the most safe and cozy full body safety harness?

ZIMAI is a top harness choice when it comes to safety at work. Their gear is known for being remarkably safe and cozy. The Full Body Harness is one of their top picks. Robust 45mm webbing is used in its design, and the dorsal D-ring offers a sturdy fall stop. Also, you may fully adjust the fit of the chest, thigh, and shoulder straps. The fact that the chest strap may be altered for more comfort is appealing. Visit ZIMAI’s site to see all their protective gear and ensure you’re safe while working!

In summary

When working up high, you must wear a harness safely. Simply explore it for flaws, put it on like a vest, tighten the belt to the right fit, and give it a final check. It’s also an excellent plan to have someone else look it over. Also, always stick to the rules and regularly check for issues. Note that wearing your harness properly ensures your safety while working at heights.



Leave a Reply

Leave a message