Shanghai Zimai Safety Technology Co., Ltd.
A buyer lists head gear for a new site order. Then they stop at line two. Does a head protection PPE manufacturer supply only shells? Or the straps, caps, and shields as well? ZIMAI is based in Shanghai, China. The company has over 30 years of exporting experience in personal protective equipment.
This article walks through each supply group in that range. It also covers plant audits, the standards that apply, and how a first order starts.
Which Items Does a Head Protection PPE Manufacturer Ship?
O head protection PPE manufacturer supplies safety helmets, bump caps, spare helmet parts, and matched sets. The range covers the shell that takes a hit and the harness that holds it. It also covers the cap for tight spaces, plus face, ear, and cold-weather cover.
Four Supply Groups in One Head Range
- Safety helmets – ABS, PE and carbon fiber shells in five stock colors.
- Bump caps – lighter cover for low-clearance areas.
- Helmet parts – suspensions and chin straps sold under their own codes.
- Sets and winter wear – helmet with face shield and earmuff, plus knitted hats.
Inside the Shanghai Base and the Plants Behind It
ZIMAI is a maker and supplier of personal protective equipment. The company was founded in Shanghai, China. Its range now spans health, security, emergency response, environmental protection, ergonomics, hazard controls, and home & community. Buyers get a one-stop purchase service. It runs from head protection to foot protection.
Scale here sits in a plant network, not one building. Some plants have been audited under SEDEX and BSCI. That audit record supports quality and traceability for the buyer.
This matters when you compare quotes. O ” hard hat factory China ” search result often hides who made the shell. As a head protection PPE manufacturer, ZIMAI states the setup plainly. So you know which papers to ask for.
Helmet Shells Come in Three Material Routes
ABS, PE, and carbon fiber are the three material routes that the helmet shells here follow. Shell material determines weight, stiffness and cost. Make sure that’s first on your spec sheet.
Vented ABS and PE Shells for Hot Sites
The two vented models are the HP004 and HP003. Air moves over the crown of a safety helmet with ventilation. Long outdoor shifts benefit from that. The HP004 features a 6-point suspension and an ABS/PE shell. CE EN 397 certified. It is available in blue, portocale, roşu, alb, and yellow colors.
Where a Carbon Fiber Safety Helmet Earns Its Place
Here is the carbon fiber safety helmet HP019. It has a 6-point ratchet suspension with a nylon tape and a sweatband. A ratchet allows a worker to adjust the fit with one hand. That counts if the gloves are on. The same five colors are used.
Standard Shell Models by Code
HP001 V-Type, HP002, HP006, HP007, and HP009 fill out the line as standard shell options.
Head Range at a Glance
| Item type | Example model | Key material | Stated conformity |
| Vented helmet | HP004 | ABS / PE | CE EN 397 |
| Carbon fiber helmet | HP019 | Carbon fiber | Ask for the model pack |
| Bump cap | HP015 | Carcasă din ABS, EVA pad | CE EN 812 |
| Helmet set | HP100 | ABS, PC and steel mesh | Ask for the model pack |
Where a Bump Cap Fits Instead of a Helmet
A bump cap is head cover for low-clearance areas. The risk there is knocking your head on a fixed object. A bump cap is not built for falling objects. So it never replaces an industrial helmet.
HP015 uses an ABS plastic shell with an EVA pad inside. The outer fabric is orange fluorescent with a reflective stripe. The cap conforms to CE EN 812. HP008 is the second bump cap option.
ÎN 812 și EN 397 are separate European standards for separate risks. ÎN 397 covers impact from above. ÎN 812 covers knocks against still objects. Any bump cap supplier that blurs the two is worth a second look.
The Parts That Decide Whether a Helmet Stays On
A helmet chin strap and suspension decide if the shell stays in place. Only when the harness holds the shell in place does it function.
The HP010 Suspension is a 6-point nylon ribbon tape harness. It includes a black sweat-absorbing pad and is compatible with the HP007 helmet. HP011 The Chin Strap is a four-point strap made of black polyester. It also suits HP007.
Why Separate Part Codes Change the Reorder Math
- A worn harness is switched, preventing an early scrapping of the shell.
- Sweat pads are a typical spare and are for everyday wear.
- The storeroom is easy, with one portion code across numerous sites.
- Only items that failed the inspection are replaced by a safety official.
One Set When the Job Needs Face and Ear Cover
A safety helmet face shield set is a single part code that contains the helmet, face shield, and ear cover. The HP100 is an ABS safety helmet with 6-point nylon tape suspension. A steel mesh face shield is added. The earmuff is included with the helmet.
Three guards are worn simultaneously during grinding, cutting, and trimming. Matched pieces prevent a typical site issue: an earmuff that won’t clip to the shell. Polycarbonate (PC) handles flying chips. Steel mesh suits dusty, hot labor.
Cold-Weather Cover for Outdoor Shifts
An acrylic knitted winter hat with a navy blue flanged brim is HP018. With a double-layer acrylic flanged edge, it is 100% knitted. For chilly shifts, this is warm wear, not impact cover. There is no standard for helmets.
Maintain one point straight. A flame-resistant item worn beneath a hood is a welder knitted cap. Other products: HP018.
What the Certification Record Actually Covers
Certification here works at three levels. They are not the same claim.
Company level: a quality management system is in place. The company is certified to ISO 9001:2015 și ISO 14001:2015. Some plants are also audited under SEDEX and BSCI.
Product level: most working gloves, încălțăminte de siguranță, masks, and Hi-Vi workwear are CE certified. For other ranges, ZIMAI shares tests and certificates with strategic suppliers in China.
Head range level: the helmet pages state conformity to CE EN 397. The bump cap page indicates that it is CE EN 812 compliant.
Read that split before you compare one safety helmet manufacturer to another. ISO certification indicates that the system has been audited. It does not certify any shell. At the quote stage, request the document pack that is tied to the specific model code.
Lead Time and How an Order Starts
The guarantee made is to produce high-quality work on time. ‘All part of the one-stop buying service. There is no stated set day count. So you regard lead time as something you validate for each order.
The Order Path, Step by Step
- Write down the model codes you want.
- Please request an inquiry or fill out the quote form with quantity and color.
- Please confirm colors, volume, and any document bundle you may want.
- Secure written confirmation of the shipment timetable before manufacturing commences.
Contact runs through the Shanghai office by phone, e-mail, or WhatsApp. Business hours are Monday to Friday, 8:30 am to 6 p.m.
Depth in One Category Beats a Thin Catalog
A buyer would rather see depth in one category than a vast but sparse catalog. This strap holds the helmet, its suspension, and its chin strap. It also holds the winter hat, the bump shield, and the earmuff set.
That means one supplier, one PO, and parts that already fit each other. A head protection PPE manufacturer built in this manner responds to specification enquiries more quickly. It also maintains the color coding stability when a site adds a workforce.
FAQs
What products fall under head protection PPE?
Winter hats, bump caps, helmet suspensions, matching sets, and knitted chin straps are all examples of head protection PPE. Each item addresses an individual danger.
- Helmets keep out blows from above.
- Caps guard against falling loads, not against knocks.
Which standard applies to a bump cap versus a safety helmet?
ÎN 812 applies to industrial bump caps. For industrial safety helmets, ÎN 397 applies. On a risk assessment, the two are never switched.
- HP015 meets the requirements of CE EN 812.
- The bump cap supplier should print the standard.
Can suspensions and chin straps be ordered separately?
Yes – HP010 Suspension and HP011 Chin Strap have their own product codes. Both fit in the HP007 helmet.
- Order a helmet chin strap and suspension as fleet spares.
- Quote the part code while reordering.
Which helmet colors are available?
Five helmet colors are listed: albastru, portocale, roşu, alb, and yellow. The same set runs across models.
- The five colors are shared across HP004 and HP019.
- The HP100 is also in the same helmet colors.
What does a helmet set include?
The HP100 has a 6-point nylon tape suspension inside an ABS safety helmet. Also included: a PC, a steel mesh face shield, and matching earmuffs.
- One covers three code guards.
- Grinding, cutting, and trimming tasks suit it.
How do I request certificates for a specific model?
Send us an inquiry with the specific model code. Ask for the paperwork pack for that item. Different papers have different ranges; thus, quote the code.
- Use the inquiry or quotation form on the site.
- Ask for the issue date as well.
Conclusion
There are several different types of head protection. Inside you’ll find shells, hats, straps, seturi, and winter covers. Shanghai Zimai Safety Technology Co., Ltd. suits customers that need certain components matched from a single supplier, with standards and sources indicated plainly.
Visit the head protection category page, note the model codes, and then submit the quote form.