Buyers look at the job first. Then they pick a glove that fits the danger. They check the material, the coating, the rating and the size. Последний, they ask the supplier for proof. This is how to choose industrial safety gloves without guessing.
В этом руководстве, you will read about five things. They are hazards, materials, ratings, fit and supplier checks. Шанхайская компания Zimai Safety Technology Co., ООО. (Зимай) wrote it. ZIMAI makes and supplies PPE. Это закончилось 30 лет опыта экспорта. PPE means personal protective equipment. All product facts come from the ZIMAI website.
How to Choose Industrial Safety Gloves in Five Steps
Five steps help you pick the right glove. Do them in order.
- Find the hazards. Write down what can hurt the hands in each job.
- Pick the material. Choose the liner and coating that fit the job.
- Check the ratings and papers. Read the levels. Ask for certificates.
- Check fit, grip and comfort. Try a sample on the real job.
- Ask for the data sheet. It lists the exact facts for one model.

Start With a Hazard Assessment of the Job
A hazard assessment is the first step in how to choose industrial safety gloves. Everything that might cause harm to a worker’s hands is listed in writing. ZIMAI have a simple rule. Safety goggles should be used after the use of any other controls.
The hazard must be appropriate for the glove. The one wearing it must be comfortable. There has to be compatibility with other personal protective equipment (СИЗ) that is worn concurrently.
Cuts, tears, and sharp edges
Sharp edges can cut or tear skin. So cut protection matters here. ZIMAI lists cut-resistant gloves и mechanical gloves .
Oils, chemicals and wet work
Chemical exposure and wet work need coated gloves. ZIMAI lists nitrile (Нян) , ПВХ and rubber gloves for this work.
Нагревать, sparks and electrical work
ZIMAI lists aluminized, leather welding and dielectric gloves. The site gives no ratings for them. So none are shown here.
Impact and vibration
ZIMAI lists anti-impact, anti-vibration and TPR-back gloves. TPR means thermoplastic rubber.
One specification line for each task
ZIMAI has a five-step method. The steps are register, задача, контакт, residual risk and specification. Residual risk is the danger left after other controls.
Write one spec line for each task. Spec is short for specification. It is a short note on what you need. It has six parts. They are glove type, hazard, standard or level, диапазон размеров, fit notes and proof needed. ZIMAI explains this in its hazard-based PPE procurement article .
Which glove family fits which hazard?
| Опасность | Where it shows up | Glove family on the ZIMAI site |
| Cuts and sharp edges | Лезвия, sheet edges, cutting tasks | Cut-resistant, mechanical |
| Масло, химикаты, мокрая работа | Очистка, dipping, liquid handling | Nitrile (Нян), ПВХ, резина |
| Нагревать, sparks, electrical | Сварка, hot work, live work | алюминизированный, leather welding, dielectric |
| Impact and vibration | Heavy tools, struck by risks | Противоударный, anti-vibration, TPR-back |
Which Glove Material Fits Which Task?
Glove material means the liner and the coating. They protect the hand. Pick them to fit the task. This is how to choose industrial safety gloves by material. HPPE means high-performance polyethylene. It is a strong fiber.
Materials and ZIMAI models
| Материал | Typical task | ZIMAI model examples |
| Nitrile (Нян) coated knit | General handling | 12185: 15 gauge cotton and lycra liner, black sandy nitrile on the palm. 11115: 15 gauge nylon and lycra liner, black micro-foam nitrile on the palm. 10120: blue nitrile fully coated, jersey liner, safety cuff |
| HPPE-liner cut-resistant | Cut hazards | 71258: 18 gauge gray HPPE liner, water-based foam nitrile on the palm, cut level D. 71613: 13 gauge gray HPPE liner, cut level C. HPPE sleeves also exist, such as 76635 |
| Арамид | Cut hazards | Gloves and sleeves, such as 74400 и 76335 |
| Stainless steel chainmail | Cut hazards | 76350: 304L stainless steel ring, protects the thumb, указательный и средний пальцы |
| Кожа | Сварка, driving | 46110: red cow split leather welding glove, full lined. Cow split, pig grain, pigskin and cow grain driver gloves are also listed |
| PVC and rubber | Chemical work | 36530: 15 хлопковая подкладка синего цвета, blue smooth and sandy PVC coat, 30 cm length. 24020: black/orange rubber industrial gloves, crinkle finish |
| Вибрация | Vibrating tools | 90217: 7 gauge polyester liner, black foam rubber on the palm and back |
| Влияние | Impact hazards | 48300: synthetic leather with PVC finger protection and a Velcro wrist closure |
Glove Grip: How Palm Coatings Differ
Glove grip starts with the palm coating. ZIMAI lists sandy, micro-foam, гладкий, crinkle (латекс), foam and dotted palms. This guide does not rank them. The site gives no grip data.
Sandy feels rough, like sand. Micro-foam has a fine foam surface. Smooth is flat. Crinkle is a wrinkled latex finish. Dotted palms have small raised dots.

Finish and model examples
| Finish | ZIMAI model |
| Sandy | 12185 |
| Micro-foam | 11115 |
| Smooth NBR | 10103 |
| Crinkle latex | 20103 |
| Micro-foam with dots | 11125 |
Ладонь, 3/4 and full coating
Coating also differs by how much of the glove it covers. A palm-coated glove, such as 12185, is coated on the palm only. А 3/4 coated glove, such as 10130, is coated past the palm. A fully coated glove, such as 10120, is coated all over.
12223 is a sandy NBR double fully coated glove. It has blue smooth nitrile, полностью покрытый. It also has black sandy nitrile on the palm and thumb.
Cut Protection and Abrasion Resistance: Reading the Ratings
Cut protection shows as a cut level on some ZIMAI models. 71258 lists level D. 71613 и 78473 list level C. 72410 списки RU 388 puncture level 2 on the palm. It lists cut level 5 on the full hand. It also has a fingertip that works with touchscreens.
Why a level is not enough
В 388 is a European standard. It is for gloves that guard against mechanical risks, like cuts and punctures. The site does not say which standard its letter levels (C and D) follow. So do not compare them with levels from other brands. Read the data sheet for the exact model.
What to ask about abrasion resistance
Abrasion resistance is how well a glove holds up to rubbing and wear. The site gives no abrasion numbers. Ask the supplier what the data sheet says for your model.
Cut plus impact
78473 is an anti-cut and anti-impact glove. It has a hi-vis yellow 13 gauge HPPE liner. It has red sandy nitrile on the palm. It also has red TPR on the back.
Chemical Exposure and Oily Work: What to Look For
Chemical exposure needs four steps. Take them in order.
- Name the liquid.
- Say how it touches the glove: a splash or a full dip.
- Choose a coating type.
- Ask for the data sheet.
ZIMAI’s chemical-resistant gloves by duty
- Light duty: 36200, 36210
- Moderate duty: 36410, 36420
- Heavy duty: 36530, 36535
- Зима: 36800 series
- ESD chemical resistant: 36400
- Arc-resistant and chemical resistant: 37000
- Антиот, anti-chemical and anti-impact: 37100
ESD means electrostatic discharge. ZIMAI also lists nitrile gauntlets (14000 series) and neoprene (24010). Gauntlets have a long cuff. Neoprene is a type of rubber.
The site gives no chemical resistance data. So ask for the data sheet for your chemical.
Dexterity, Comfort and Long Shifts
Dexterity is how well your fingers can do fine work in a glove. Glove grip and dexterity both change how a glove feels on a long shift. Gauge tells you how fine the knit is. A higher number means a finer knit.
- 18 измерять: 71258
- 15 измерять: 12185, 11115
- 13 измерять: 71613
- 7 измерять: 90217
ZIMAI lists thin gloves and touchscreen gloves. 71038 и 72410 are for touchscreen use.
Comfort features on the site
- Seamless liners
- Защитная манжета (10120)
- Застежка-липучка на запястье (48300)
- Thermal knitted gloves
ZIMAI lists latex-coated and nitrile-coated gloves. It makes no claims about allergies.
Glove Sizing: How to Get the Fit Right
Glove sizing is the last check in how to choose industrial safety gloves. The ZIMAI site shows sizes in two ways. One is a number, like 7 или 11. The other is a letter, like S or XXL. Many models show both, such as 7/S.
Listed sizes by model
| Модель | Listed sizes |
| 71258 | 7/S–11/XXL |
| 12185 | 6/XS–11/XXL |
| 11115 | 6/XS–11/XXL |
| 24020 | 7/S–10/XL |
| 48300 | S/7–10/XL |
| 76350 | С, М, л, XL |
Test a sample on the real task before a big order. Ask the supplier for a size chart. The site has none.

Which Standards and Certificates Should You Ask For?
Ask for the certificate and the data sheet for the exact model. ZIMAI says:
- Most working gloves, защитная обувь, masks and Hi-Vi workwear are CE certified. CE is a European product mark.
- Other PPE shares tests and certificates with strategic suppliers in China.
- The site has a Standard section with an “En стандарт для защитных перчаток” страница.
- Each product has a data sheet.
See also Маркировка CE для СИЗ: Стандарты, Тестирование и документы and What Belongs in a Model-Specific PPE Compliance File Before Purchase?
What Goes Into the Cost of Industrial Safety Gloves
The ZIMAI site shows no prices. Ask for a quote. ЗИМАЙ reusable vs disposable article lists these costs:
- Цена покупки
- Коэффициент замещения
- Очистка
- Проверка и хранение
- Обучение
- Disposal
- Время простоя и запасы
It also gives two simple formulas:
- Общая стоимость владения = покупка + уборка + инспекция + замена + утилизация
- Cost per use = total cost ÷ number of uses
ЗИМАЙ disposable range включает в себя 15010 и 15020 (nitrile), 24040 (латекс) и 35020 (vinyl).
Common Mistakes Buyers Make
- Buying only by the category name
- Skipping the hazard check
- Not checking glove sizing and the size range
- Not asking for the data sheet
- Picking by price alone
- Forgetting who wears the gloves, what the task is, or what other PPE they wear
How to Check a Glove Supplier Before You Order
Supplier proof is part of how to choose industrial safety gloves. ZIMAI’s About page says:
- Он сертифицирован по ISO 9001:2015 и ИСО 14001:2015.
- Some of its plants are audited to SEDEX and BSCI. These are factory audit programs.
- Это закончилось 30 лет опыта экспорта. It is based in Shanghai (Songjiang).
- Выставки: A+A Düsseldorf 2023 и 2025, НСК Денвер 2025 and a Canton Fair.
The site says “in time delivery.” It gives no number of days. Ask for the lead time in your quote. See also В сертификате СИЗ указана другая фабрика and Can a PPE Factory Have Both SMETA and amfori BSCI Audits?
How to Send Your Glove Request to ZIMAI
Send ZIMAI five details. They are the task, the hazard, the model or glove type, the size range and the proof you need.
- Электронная почта: sales@zmsafety.cn
- Телефон: +86-21 67766378
- Hours: С понедельника по пятницу, 8.30am–6pm
- Online: fill in the Получите цитату form
Начните с Hand Protection category . You can also open product pages such as 71258 , 72410 и 78473 .
Часто задаваемые вопросы
-
Which safety gloves are suitable for oily industrial work?
ZIMAI’s nitrile (Нян) coated gloves are a good place to start. They come in sandy, micro-foam and smooth finishes (12185, 11115, 10120). Its PVC and rubber chemical gloves also fit. The site makes no oil-resistance claim in its product text. So check oil resistance on the model’s data sheet.
-
How do I choose the right safety gloves?
Start with the hazard. Затем выберите материал, coating, rating and size that fit the task. Try a sample on the real job. Ask for the certificate and data sheet of that exact model. This is how to choose industrial safety gloves with less risk.
-
What should I look for when buying gloves?
Look for a glove that matches the hazard. Check the cut level, size range and coating on the product page. Ask for the data sheet and the certificate. Ask for the lead time in the quote too. Do all of this before you order.
-
What cut level do ZIMAI cut-resistant gloves have?
72410 списки RU 388 cut level 5 on the full hand. It lists puncture level 2 on the palm. 71258 lists level D. 71613 и 78473 list level C. The site does not say which standard the letter levels follow. So check each data sheet.
-
How do I pick the right glove size?
Use the size range on the product page. Например, 12185 comes in 6/XS–11/XXL. Order a sample and test it on the real task. Ask the supplier for a size chart. The ZIMAI site has none. Sizes show as numbers, letters or both.
-
Should I buy disposable or reusable gloves?
Choose disposable gloves when cleaning cannot remove the contamination. Reusable gloves can cost less if you use them often and they stay lightly contaminated. Look at the cost per use, not the price of one pair. ZIMAI lists both kinds.
Заключение
Buying gloves can be simple. Know the hazard. Match the glove. Ask for the papers. This is how to choose industrial safety gloves that fit the job.
Want one supplier for hand protection and other PPE? Shanghai Zimai Safety Technology Co., Ltd . хорошо подходит. На его сайте указан ISO 9001:2015 и ИСО 14001:2015 сертификация. Send your task list and size range to get a quote.
Shanghai Zimai Safety Technology Co., Ltd.