รองเท้าบูทกันฝน PVC Safety ปกป้องเท้าของคุณในที่ทำงานได้อย่างไร?

What keeps your feet safe when a tool falls or you step on a nail? The answer is inside your boot. PVC safety rain boots keep your feet safe in three ways. A steel toe cap guards your toes when heavy things fall or roll. A steel plate in the sole stops nails from going into your foot. A sole made for grip helps you stay on your feet when floors are wet. The PVC keeps water out.

Shanghai Zimai Safety Technology Co. , Ltd. (zimai) is a safety rain boots manufacturer. It has sold safety gear around the world for over 30 ปี. You can see all its รองเท้าบูทกันฝนพีวีซี in one Rainboot range of six models.

This guide shows how each part of the boot works. It explains the EN safety standards in plain words. It also helps you pick the right boot for your job.

Safety Rain Boot or Ordinary Rain Boot?

A safety rain boot keeps water out and keeps your feet safe. It has a toe cap, a steel plate and a sole tested for grip. A normal rain boot only keeps water out.

What EN ISO 20345 ปก

ใน ISO 20345 is the European safety standard for work shoes and boots. ZIMAI’s standards guide says it protects you from bumps and crushing. It also guards you against things that fall or roll, and against sharp or pointed objects.

The guide puts S4 and S5 boots in class 2. This means they are made fully of rubber or plastic. That is why waterproof safety boots can be made in one piece from PVC.

Three Things a Plain Rain Boot Lacks

• No toe cap to protect your toes if something heavy falls.
• No steel plate to stop nails from going through the sole.
• No slip rating, so you cannot tell if it grips as well as slip resistant rain boots.

Inside the Build of PVC Safety Rain Boots

PVC safety rain boots have three main parts. There is a steel toe cap, a steel plate in the sole (the midsole) and a one-piece PVC body. The table below shows the details of each ZIMAI model.

ZIMAI Rainboot Specs at a Glance

แบบอย่าง	วัสดุ	หมวกนิ้วเท้า	พื้นรองเท้าชั้นกลาง	สี	มาตรฐาน (as listed)	ขนาด
PB7000	พีวีซี	เหล็ก	Steel plate	Yellow/black	ใน ISO 20345:2011 S5 สรา	37-47
PB7100	พีวีซี	เหล็ก	Steel plate	Green/black	ใน ISO 20345:2011 S5 สรา	37-47
PB7200	พีวีซี	เหล็ก	Steel plate	White	ใน ISO 20347:2012 S5 สรา	37-47
PB7300	พีวีซี	เหล็ก	Steel plate	สีดำ	ใน ISO 20347:2012 S5 สรา	37-47
PB7500	EVA upper and outsole	ไม่อยู่ในรายการ	ไม่อยู่ในรายการ	สีดำ	ไม่อยู่ในรายการ	37-47
PB7600	PVC upper, NBR outsole	เหล็ก	Steel plate	สีดำ	ไม่อยู่ในรายการ	37-47

How to Read the Table

Five of the six models are steel toe PVC boots. PB7000, PB7100, PB7200 and PB7300 are made fully of PVC. PB7600 has a PVC top and a sole made of NBR, a type of rubber. All five are PVC safety boots with steel midsole plates.

PB7500 is not like the others. It is one of the light EVA rain boots, and its page lists no steel parts. If you want white PVC boots, PB7200 is your only pick.

How Does the Steel Toe Cap Guard Your Toes?

The steel toe cap takes the hit so your toes do not. In PVC safety rain boots, the cap sits inside the front of the boot, over your toes.

How Much Force the Toe Cap Takes

Under EN ISO 20345, the toe cap gives 200 จูลของการป้องกันแรงกระแทก. This is for things that fall on your toes. It also gives 15,000 newtons of crush protection. This is for heavy loads that press down.

These numbers come from ZIMAI’s EN safety footwear standards page. In this range, they apply to PB7000 and PB7100. These are the two models listed under EN ISO 20345.

SB Versus S5

An SB boot has just a toe cap and basic slip resistance. An S5 boot gives you much more. It has a closed heel and a sole that stops static. Its heel soaks up shock as you walk. It also stops nails from coming through, and it has a deep tread for grip.

When you compare steel toe PVC boots, look at the S class. It tells you what you get besides the toe cap.

Why the Steel Plate Midsole Matters Underfoot

The steel plate midsole keeps nails, glass and other sharp things out of your foot. It sits inside the sole, so you cannot see it.

ZIMAI’s class table shows that S5 boots must stop sharp objects from coming through. They also need a deep tread. In the table, the letter P means a metal plate in the sole. A steel plate is one type of metal plate.

This plate makes the five steel models puncture resistant boots, not just rain boots. Are there loose screws or broken pallets on your site? Then pick PVC safety boots with steel midsole protection.

Here is an easy way to remember it. The toe cap guards you from what falls. The plate guards you from what you step on.

What Keeps the Outsole Gripping Wet Floors?

The outsole grips wet floors through its material, its tread and its slip rating. ที่ NBR-sole PB7600 safety boots have a black PVC top and a sole made of NBR rubber. The other four steel models have a PVC sole.

The Slip Mark on Each Product Page

PB7000, PB7100, PB7200 and PB7300 show SRA as their slip mark. This mark comes from the 2011 และ 2012 versions of the standards on those pages. If grip matters most to you, ask for the test report.

How the 2022 Standard Tests Slip

ใน ISO 20345:2022 is the newest version of the standard. Under it, every safety boot gets a basic slip test. The boot is tested on ceramic tiles covered in soapy water. Both the front of the sole and the heel are checked.

Some boots also pass a harder test and carry an SR mark. This test uses glycerol, a slippery liquid, on the same tiles.

S5 boots also have a deep tread. It helps you grip on mud and rough ground. For slip resistant rain boots, a good tread and a test mark work together.

Where EVA Rain Boots Fit, and Where They Don’t

The PB7500 is good for light work in wet places. Use it where nothing can fall on your feet and there are no sharp things on the ground. The whole boot, top and sole, is made of black EVA. It comes in sizes 37-47.

ที่ PB7500 EVA rain boots page shows no toe cap, no steel plate and no safety standard. Wear it as a light rain boot only. It is not a steel toe or certified safety boot.

How to Match the Boot to Your Site Risks

Pick PVC safety rain boots based on the dangers at your work, not the price. ZIMAI’s standards guide lists three main dangers. Things can fall on your feet, you can step on sharp objects, and floors can be slippery.

Risk-to-Model Table

Site risk	Feature to look for	Models that list it
Falling or rolling objects	หมวกนิ้วเท้าเหล็ก	PB7000 to PB7300, PB7600
Nails or sharp bits underfoot	Steel plate midsole	PB7000 to PB7300, PB7600
Buyer needs S5 under EN ISO 20345	ใน ISO 20345:2011 S5 สรา	PB7000, PB7100
เปียก, slippery floors	Listed SRA slip mark	PB7000 to PB7300
Light wet work, no impact risk	EVA upper and outsole	PB7500

The five steel models are waterproof safety boots and puncture resistant boots at the same time. Four of them also have the SRA mark. This is the mark to look for in slip resistant rain boots.

Color Choices

The range comes in yellow/black, green/black, white and black. If you need white PVC boots, choose the white PB7200 safety boots . They are the only white pair in the range.

Buying From a Safety Rain Boots Manufacturer

ZIMAI is open about its history, its checks and its products. You can look into the company before you buy.

Factory Introduction

ZIMAI started in Shanghai, and its office is in Songjiang. It has sold safety gear to buyers around the world for over 30 ปี. You can find it at big trade shows. It went to A+A in Düsseldorf in 2023 และ 2025, and to NSC in Denver in 2025. It also took part in the 139th Canton Fair in Guangzhou.

Factory Certification

ZIMAI ถือ ISO 9001:2015 เพื่อคุณภาพและ ISO 14001:2015 for care of the environment. Some of its factories have also been checked under SEDEX and BSCI. You can see ZIMAI’s certificate list online.

Focus on One Product Line

ZIMAI gives rain boots their own page, with six models in one place. You do not have to search through other shoes. This makes it easy to compare PVC safety boots with steel midsole plates.

One-Stop Supply

ZIMAI sells safety gear for the whole body, from head to foot. It promises good quality and on-time delivery. You can order your boots and rainwear together. Read the PVC rain suit guide to learn more about rainwear.

คำถามที่พบบ่อย

• Are PVC safety rain boots waterproof?

ใช่, PVC safety rain boots are waterproof. Each boot is made in one piece, so water cannot get in. That makes them true waterproof safety boots.

• What does S5 mean on a safety boot?

S5 is a type of safety boot made fully of rubber or plastic. It has a toe cap and a plate in the sole that stops nails. It also has a deep tread for grip.

• Do EVA rain boots have a steel toe?

เลขที่, the PB7500 EVA boot has no steel toe. If things can fall on your feet at work, pick one of the steel toe PVC boots.

• What sizes do ZIMAI rain boots come in?

ZIMAI rain boots come in sizes 37 ถึง 47. This is true for all six models, including the white PVC boots.

• Do steel midsole rain boots stop nails?

ใช่, a steel plate inside the sole stops nails. Five ZIMAI models have this plate, so they are puncture resistant boots. The PB7500 does not.

• How is EN ISO 20345 different from EN ISO 20347?

ใน ISO 20345 is for safety boots. ใน ISO 20347 is for everyday work shoes. Work shoes under 20347 do not need a toe cap or a steel plate. Still, the PB7200 and PB7300 have both.

บทสรุป

The toe cap guards against falling loads. The steel plate stops sharp things on the ground. The sole helps you grip on wet floors. These parts make PVC safety rain boots real safety gear. They do more than keep rain out.

Shanghai Zimai Safety Technology Co. , Ltd . is a good safety rain boots manufacturer to start with. It shows clear details for every boot. It also shares its certificates. Want a price? Request a rain boot quote and share the model, ขนาด, color and number of pairs.